A swaggie walking his circuit out west knew where the water was, and he also knew that when water was more than a day’s walk he’d have to carry his own supply. Usually a swagman would carry a flax water bag. This would not only allow him to carry 3 or 4 litres relatively easily, but the slightly porous nature of the bag meant the water was always cool. In fact, the hotter the day, the cooler the water. Other methods of carrying water were, in a 5 pint billycan with the lid tied on, or in a canteen or glass bottle on a shoulder strap.
I don’t use a billycan to carry my water, since when I do carry one, it’s usually used to carry fresh food rather than water. A billycan packed with shredded stringybark lets you carry a half a dozen fresh chook’s eggs safely, even if the billy is tied off to your swag strap and the swag thrown around and sat upon. I use a water bag and I use canteens for water carriage on traditional trips.
My waterbag is six Imperial pints (approx 3.5 litres) and it is an army issue vehicle waterbag made in 1941. I have also made an exact replica of this bag using lighter weight canvas and it works perfectly well. The army water bag originally had a porcelain spout. This was a hygienic measure since many people would share the same water bag. I stupidly knocked my bag onto concrete and broke the spout not long after I acquired it, so I made my own spout out of a section of seasoned black wattle and bored a hole through it to accept a water bottle cork. It hasn’t let me down.
To prepare a flax water bag for use it’s necessary to first soak it for up to two days before hand to swell the fibres. I soak these in hot water since that not only swells the fibres, but it shrinks the bag a little as well. Both of these things make it hold water better.
The water bag is hand-carried. A pair of leather straps through the grommet-holes in the bag allow you to push a stick through the straps, which provides a perfect handhold.
Canteens are also useful. Sometimes I will carry three canteens instead of a water bag. I tend to carry canteens in three main ways – on the belt, in the nosebag or on a shoulder strap. I have a pre-WWI US M1910 canteen which I carry in a belt pouch. It has a nesting cup which is almost identical to a modern Australian Army cups, canteen but it’s made of aluminium. I also have several Australian WWI/WWII enamel water bottles. The most oft-used of these is one set up for Light Horse use in a leather shoulder carrier. The design of the carrier makes it very easy to drink while on the go. It’s almost as easy as sipping from a modern-day Camelbak or similar hydration bladder.
Water purification is a topic which is important. Once you delve into the source material like I have, you read the old swaggies talking about drinking creek water with animal remains in it, stagnant, algae-packed ponds or even muddy puddles. That’s how it was usually done back in the day, but coming from an outdoor industry background, I prefer to treat my water. Getting a bad case of the “hurls and squirts” two days after you’ve drunk dodgy water isn’t my idea of fun, particularly if you’re halfway through a month-long swaggin’ it expedition. There were ways to purify water available to the swagmen of yesteryear and like today, they could be classified into three main types – filtering, boiling and chemical treatment.
Filtering was usually done with multiple layers of cotton such as a neckerchief or a knotted shirtsleeve.
To filter I use a millbank filter bag, which is a 1940s-era invention. It is a canvas bag which is first soaked and then filled with water. When the water level reaches the marked line you place your quartpot under it and start collecting the filtered water. It’s only useful for removing mud and particulate matter. You still need to otherwise treat the water before drinking. The millbank filter can be made more effective by placing a couple of handfuls of fine sand inside.
Boiling is the surest way to purify water. Conventional wisdom states that rolling-boiling your water for a minute will kill most of the bugs. To be 100% sure, keep a rolling boil for 10 minutes. If you haven’t filtered the water first, there are a couple of different ways to deal with muddy water or particulate matter. The easiest is to drop a few hefty pinches of fine wood ashes into the water as it’s boiling. The ashes will settle to the bottom of the quartpot or billy, taking the mud with it. You can simply pour the clear water off the top.
Chemical treatment is probably the most convenient. Even if you can’t filter or boil the water then and there, you can make it drinkable using chemicals. The most common chemical agent carried back in the day was condy’s crystals, otherwise known as potassium permanganate. These were a multi-purpose item, so it was worth carrying a small bottle of them. The efficacy of condy’s crystals for use as a water purifying agent isn’t all that good, especially if you need your water quickly. It takes up to 24 hours for a 1g per litre solution of condy’s crystals to kill the nasties. Boiling is quicker and more effective.
One area where condy’s crystals does work well is in removing taste and smell from foul water. If you boil water from a stagnant pool, it will still taste like it’s a stagnant pool. Add three or four individual condy’s crystals to a quartpot of water and the oxidation effects of the chemical will make the water more palatable within a few minutes.
Personally, when it comes to chemical water treatment, I use a modern-day option, Aquatabs, which are Sodium Dichloroisocyanurate tablets used at the rate of one tablet to a litre of water. Contact time is 30 minutes, after which time the water is safe to drink.